The Infinity Turbine by Global Energy is a geothermal, solar and waste heat (industrial waste heat, gas turbine waste heat, diesel engine waste heat) Organic Rankine Cycle (ORC) turbine that generates electricity or via a PTO shaft horsepower for pumps, compressors and other equipment. Excess heat from the system output can be used for CHP applications, including desalination, hot water and process heat. The turbine will operate off of geothermal or low grade industrial waste heat. It will also operation from solar collector heat, as long as there is a 125 deg. F (65 deg C) heat differential between the evaporator and condenser. The condenser may operate off of a secondary heat exchanger for CHP hot water or chiller applications. It may also be used in tandem with a air cooling tower, or ground based geothermal system. Since the unit is skid mounted, it can be used on site or made portable by installing in a standard 20 foot ISO Ocean Shipping Container. Available in 60hz or 50hz, this unit can be used and shipped complete anywhere in the world. The generator size ranges from 80 kw to 800 kw per one 20-40 foot module. Additional modules may be combined for larger power outputs. For Geothermal applications (Enhanced Geothermal System (EGS)), you may utilized oil and gas wells, or abandoned wells that reach depths to get temperatures greater than 150 deg. C. In general, you may sink a deep well anywhere in the continental USA around a depth of 15000 ft to reach this ...
No comments:
Post a Comment